11. What is an important factor to consider when deploying the ProCurve NAC 800 using the DHCP quarantine method?
A. The IP address lease duration must be set to five minutes or less on the DHCP server.
B. The DHCP server requires one additional, non-overlapping scope for every existing DHCP scope.
C. A switch must support traffic mirroring for each DHCP server protected by the NAC 800.
D. Endpoint Integrity cannot be enforced for devices using static IP addresses.
E. The DNS server scope option on the DHCP server must be set to the IP address of the NAC 800.
Answer: D
12. A network is configured to support a ProCurve NAC 800 operating with the DHCP quarantine method. How does an endpoint transition from a quarantine IP address to a non-quarantine IP address after passing integrity testing?
A. The NAC 800 triggers the switch to re-authenticate the endpoint causing a new DHCP request to be issued.
B. The NAC 800 sends a DHCP release to the endpoint followed by a DHCP assignment message with the IP address.
C. The switch stops forwarding DHCP requests from the endpoint to the NAC 800 and instead sends them to the DHCP server.
D. Any subsequent DHCP request from the endpoint is allowed by the NAC 800 to pass to the DHCP server.
Answer: D
13. A network is configured to support a ProCurve NAC 800 operating with the DHCP quarantine method. The NAC 800 is located between a ProCurve 3500yl switch and a DHCP server. How is DHCP traffic processed when an endpoint, that is currently unknown to the NAC 800, sends a DHCP request for an IP address?
A. The switch requests the endpoint’s integrity state from the NAC 800 before forwarding to the DHCP server.
B. If the NAC 800 receives a DHCP request addressed to the DHCP server, the request is blocked by the NAC 800.
C. The DHCP server checks the endpoint’s integrity state passed to it by the NAC 800 before responding with an IP address.
D. The DHCP server responds with a quarantine IP address initially and waits for the NAC 800 to indicate the endpoint has passed integrity testing.
Answer: B
14. A ProCurve 5406zl switch is connected to port 1 of a ProCurve NAC 800 and a DHCP server is connected to port 2 of the NAC 800. You are planning to deploy the ProCurve NAC 800 with the DHCP quarantine method using a shared subnet approach. Which configuration requirement must be satisfied?
A. The quarantine and non-quarantine subnets defined on the NAC 800 must be the same.
B. The switch requires that separate VLANs be defined for the quarantine and non-quarantine subnets.
C. Each switch VLAN supporting the endpoints must use a single IP helper set to the IP address of the NAC 800.
D. The scope on the DHCP server and the quarantine subnet on the NAC 800 must use non-overlapping IP addresses.
Answer: D
15. You are configuring a ProCurve NAC 800 to operate using the DHCP quarantine method. Which parameters are specified when adding a quarantine area? (Select three.)
A. IP address of the DHCP server
B. IP address of a RADIUS server
C. IP address of a default gateway
D. range of quarantine IP addresses
E. lease duration time for IP addresses
F. non-quarantine subnet using CIDR notation
G. IP address of a DNS server for quarantine subnet
H. static route for endpoints to use when quarantined
Answer: CDF
16. _____ Sets an alias for a host name
A. DNS Event Logging tab
B. DNS Debug Logging tab
C. DNS CNAME (canonical name)
Answer: C
17. 10.0.0.0 255.0.0.0 (Assignable IP range - 10.0.0.1-10.255.255.254) is
A. Class C
B. Class D
C. Class A
D. Class B
Answer: C
18. _______ : Declares the host that's the most authoritative for the zone and, as such, is the best source of DNS information for the zone.
A. DNS PTR Record
B. CORRECT: DNS Start of Authority
C. DNS Monitoring tab
D. DNS A Record
Answer: B
19. which is the type of DNS Scopes
A. Normal DHCP Scope
B. CORRECT: Normal, Multicast, Super
C. Multicast Scope
D. Forward Lookup Zone
Answer: B
20. _____. Is the process of placing timestamps on dynamically registered records
A. CORRECT: Aging
B. IP
C. AIPAA
D. TCP
Answer: A
More Questions & Answers:-
Page1 Page2 Page3 Page4 Page5 Page6
A. The IP address lease duration must be set to five minutes or less on the DHCP server.
B. The DHCP server requires one additional, non-overlapping scope for every existing DHCP scope.
C. A switch must support traffic mirroring for each DHCP server protected by the NAC 800.
D. Endpoint Integrity cannot be enforced for devices using static IP addresses.
E. The DNS server scope option on the DHCP server must be set to the IP address of the NAC 800.
Answer: D
12. A network is configured to support a ProCurve NAC 800 operating with the DHCP quarantine method. How does an endpoint transition from a quarantine IP address to a non-quarantine IP address after passing integrity testing?
A. The NAC 800 triggers the switch to re-authenticate the endpoint causing a new DHCP request to be issued.
B. The NAC 800 sends a DHCP release to the endpoint followed by a DHCP assignment message with the IP address.
C. The switch stops forwarding DHCP requests from the endpoint to the NAC 800 and instead sends them to the DHCP server.
D. Any subsequent DHCP request from the endpoint is allowed by the NAC 800 to pass to the DHCP server.
Answer: D
13. A network is configured to support a ProCurve NAC 800 operating with the DHCP quarantine method. The NAC 800 is located between a ProCurve 3500yl switch and a DHCP server. How is DHCP traffic processed when an endpoint, that is currently unknown to the NAC 800, sends a DHCP request for an IP address?
A. The switch requests the endpoint’s integrity state from the NAC 800 before forwarding to the DHCP server.
B. If the NAC 800 receives a DHCP request addressed to the DHCP server, the request is blocked by the NAC 800.
C. The DHCP server checks the endpoint’s integrity state passed to it by the NAC 800 before responding with an IP address.
D. The DHCP server responds with a quarantine IP address initially and waits for the NAC 800 to indicate the endpoint has passed integrity testing.
Answer: B
14. A ProCurve 5406zl switch is connected to port 1 of a ProCurve NAC 800 and a DHCP server is connected to port 2 of the NAC 800. You are planning to deploy the ProCurve NAC 800 with the DHCP quarantine method using a shared subnet approach. Which configuration requirement must be satisfied?
A. The quarantine and non-quarantine subnets defined on the NAC 800 must be the same.
B. The switch requires that separate VLANs be defined for the quarantine and non-quarantine subnets.
C. Each switch VLAN supporting the endpoints must use a single IP helper set to the IP address of the NAC 800.
D. The scope on the DHCP server and the quarantine subnet on the NAC 800 must use non-overlapping IP addresses.
Answer: D
15. You are configuring a ProCurve NAC 800 to operate using the DHCP quarantine method. Which parameters are specified when adding a quarantine area? (Select three.)
A. IP address of the DHCP server
B. IP address of a RADIUS server
C. IP address of a default gateway
D. range of quarantine IP addresses
E. lease duration time for IP addresses
F. non-quarantine subnet using CIDR notation
G. IP address of a DNS server for quarantine subnet
H. static route for endpoints to use when quarantined
Answer: CDF
16. _____ Sets an alias for a host name
A. DNS Event Logging tab
B. DNS Debug Logging tab
C. DNS CNAME (canonical name)
Answer: C
17. 10.0.0.0 255.0.0.0 (Assignable IP range - 10.0.0.1-10.255.255.254) is
A. Class C
B. Class D
C. Class A
D. Class B
Answer: C
18. _______ : Declares the host that's the most authoritative for the zone and, as such, is the best source of DNS information for the zone.
A. DNS PTR Record
B. CORRECT: DNS Start of Authority
C. DNS Monitoring tab
D. DNS A Record
Answer: B
19. which is the type of DNS Scopes
A. Normal DHCP Scope
B. CORRECT: Normal, Multicast, Super
C. Multicast Scope
D. Forward Lookup Zone
Answer: B
20. _____. Is the process of placing timestamps on dynamically registered records
A. CORRECT: Aging
B. IP
C. AIPAA
D. TCP
Answer: A
More Questions & Answers:-
Page1 Page2 Page3 Page4 Page5 Page6
No comments:
Post a Comment